Creating depth-based breakout plots

On the Depth Based CMW (Check Mud Weight) form (Wellbore Stability > Check Mud Weight > Depth Based CMW), you can display the following depth-based plots:

• Drilling Direction  A lower hemispheric plot of the breakout width for arbitrary wellbore orientations
• MW vs UCS  The Mud Weight versus rock strength to observe the resulting breakout width
• Wellbore Cross Section plots  Observe the cross sectional view of the wellbore for any fixed depth along the trajectory of the well

For each of these plots, you need to supply the depth (MD or TVDRT).

The form also shows, as read-only values, the minimum and maximum MD of the well.